Left Hand MIZUNO T24 WEDGES
FORGED IN HIROSHIMA JAPAN
One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.
CRAFTSMAN REFINED TOPLINE
Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.
WRAP-AROUND SOLE RELIEF
Increased sole relief to heel and toe across all 5 grind options.
SPIN-WEIGHTED BLADE DESIGN
A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.
QUADCUT GROOVES
An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.
WET WEATHER PERFORMANCE
Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.
LOFT SPECIFIC PROFILE
Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).
THREE FINISH OPTIONS
Soft White Satin (with copper underlay), Denim Copper and Tour Raw
Shaft:True Temper Dynamic Gold Tour Issue Steel S400
| Flex | Weight | Trajectory |
|---|
| S400 | 132g | Low |
T24 PITCHING WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 46/08 | 46 | 63 | 35.5″ | 35.75″ | 8 | S |
| 48/10 | 48 | 63 | 35.5″ | 35.75″ | 10 | S |
T24 GAP WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 50/08 | 50 | 63 | 35.25″ | 35.5″ | 8 | S |
| 52/10 | 52 | 63 | 35.25″ | 35.5″ | 10 | S |
T24 SAND WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 54/08 | 54 | 63 | 35.25″ | 35.5″ | 8 | D |
| 54/10 | 54 | 63 | 35.25″ | 35.5″ | 10 | S |
| 56/06 | 56 | 63 | 35.25″ | 35.5″ | 6 | C |
| 56/08 | 56 | 63 | 35.25″ | 35.5″ | 8 | V |
| 56/10 | 56 | 63 | 35.25″ | 35.5″ | 10 | D |
| 56/12 | 56 | 63 | 35.25″ | 35.5″ | 12 | S |
T24 LOB WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 58/04 | 58 | 63 | 35.25″ | 35.5″ | 4 | X |
| 58/08 | 58 | 63 | 35.25″ | 35.5″ | 8 | C |
| 58/10 | 58 | 63 | 35.25″ | 35.5″ | 10 | V |
| 58/12 | 58 | 63 | 35.25″ | 35.5″ | 12 | D |
| 60/06 | 60 | 63 | 35.25″ | 35.5″ | 6 | X |
| 60/10 | 60 | 63 | 35.25″ | 35.5″ | 10 | C |
| 60/12 | 60 | 63 | 35.25″ | 35.5″ | 12 | V |
